Atomic Layer Etching: Why the Next Semiconductor Breakthrough May Be Removing One Atom at a Time

For decades, semiconductor innovation has been driven by the industry’s ability to manufacture increasingly smaller and more complex electronic structures. Advances in lithography have enabled engineers to define microscopic circuit patterns, while sophisticated deposition technologies have made it possible to construct thin films with extraordinary precision. However, creating these structures requires more than adding materials and defining patterns. Semiconductor manufacturers must also remove unwanted material without damaging the delicate structures surrounding it. As transistor dimensions approach the atomic scale and three-dimensional architectures become increasingly common, conventional etching techniques are encountering significant limitations. Atomic layer etching (ALE) is emerging as an increasingly important manufacturing technology because it enables engineers to remove material in precisely controlled increments, potentially approaching the thickness of individual atomic layers. Rather than relying on continuous chemical or plasma reactions, ALE uses carefully sequenced processes to achieve exceptional control over material removal. This capability could become essential to manufacturing the next generation of advanced semiconductors.

Why Etching Is Essential to Semiconductor Manufacturing

Semiconductor fabrication involves repeatedly depositing, patterning, and removing materials to create the intricate structures that form modern integrated circuits. While lithography defines where features should be located, etching physically transfers those patterns into the underlying materials. This process is used to form transistor structures, electrical contacts, isolation regions, interconnect trenches, and numerous other features essential to semiconductor operation.

Conventional etching technologies generally rely on chemical reactions, energetic ions, or combinations of both to remove material from a wafer. Wet etching uses liquid chemicals to dissolve selected materials, while dry etching employs reactive gases and plasma environments to create precisely defined structures. Reactive ion etching has become particularly important because it allows manufacturers to remove material directionally, producing narrow features with relatively vertical sidewalls.

These technologies have supported decades of semiconductor scaling, but their limitations become increasingly significant as device dimensions shrink. When a transistor structure measures only a few nanometers, removing even a small amount of unintended material can alter its electrical behavior. Excessive etching may damage underlying layers, change critical dimensions, or introduce microscopic defects that reduce device reliability.

The challenge is no longer simply removing material efficiently. Manufacturers must remove exactly the intended material while preserving everything around it.

How Atomic Layer Etching Works

Atomic layer etching addresses this challenge through a controlled sequence of surface reactions. Instead of continuously exposing a wafer to reactive chemicals or energetic plasma, ALE separates material removal into distinct steps designed to limit how much material can be removed during each cycle.

A typical process begins by exposing the wafer to a reactive chemical species that modifies only the outermost portion of the target material. This treatment changes the surface chemistry, making the modified region easier to remove than the underlying material. The process then introduces a second reaction or carefully controlled energy source that removes the modified layer while minimizing damage to the material beneath it.

Once the modified surface has been removed, the process can be repeated to achieve the desired etching depth. Because the individual reactions are designed to become self-limiting, engineers can control material removal by adjusting the number of cycles rather than relying exclusively on exposure time.

This approach provides a level of precision that is difficult to achieve through conventional continuous etching. Depending on the material and process chemistry, individual cycles may remove only a fraction of a nanometer.

Importantly, atomic layer etching does not always remove exactly one complete atomic layer per cycle. The amount of material removed depends on the chemical reactions, surface structure, and operating conditions. Its defining advantage is the ability to achieve highly repeatable, tightly controlled material removal at atomic or near-atomic dimensions.

Why Conventional Etching Is Becoming Less Effective

As semiconductor structures become smaller, the margin for manufacturing error decreases dramatically. A dimensional variation that would have been insignificant in an older semiconductor process may represent a substantial percentage of a modern transistor’s critical dimensions.

Conventional plasma etching introduces additional challenges because energetic ions can damage semiconductor surfaces, alter material composition, or create defects within sensitive structures. These effects become particularly problematic when manufacturers work with ultrathin gate dielectrics, nanoscale transistor channels, and advanced semiconductor materials.

Another concern involves etch selectivity, which describes how effectively a process removes one material while preserving another. Modern semiconductor devices contain increasingly complex combinations of silicon, silicon dioxide, silicon nitride, high-permittivity dielectrics, and specialized metals. Etching one material without affecting neighboring layers requires carefully controlled chemical interactions.

Atomic layer etching provides a potential solution because surface modification and material removal can be optimized independently. This separation allows engineers to design processes that preferentially react with specific materials while minimizing unintended removal or damage.

The resulting improvements in dimensional control and surface quality can become especially valuable when manufacturing structures with extremely narrow tolerances.

Three-Dimensional Transistors Are Increasing Demand for Precision

The transition from planar transistors to increasingly complex three-dimensional architectures has made atomic-scale material removal more important.

FinFET technology introduced vertical transistor channels that improved electrical control compared with conventional planar devices. More recently, gate-all-around transistor architectures have extended this approach by surrounding semiconductor channels with gate material on multiple sides.

These structures require extremely precise fabrication because the electrical characteristics of the finished transistor depend on the dimensions and surface quality of its microscopic channels.

During gate-all-around transistor manufacturing, engineers may need to selectively remove sacrificial materials from between closely spaced semiconductor nanosheets. This creates narrow cavities that must be formed without damaging the active channel structures.

Conventional etching methods can struggle to maintain the necessary selectivity and uniformity within these confined spaces. Atomic layer etching offers greater control over the removal process, helping manufacturers preserve delicate structures while achieving the required geometry.

The technology is also relevant to emerging complementary field-effect transistor architectures, which vertically integrate different transistor types to increase device density. As semiconductor structures become more vertically complex, precise material removal will become increasingly important to maintaining electrical performance and manufacturing consistency.

Recent Research Demonstrates Progress in Silicon Dioxide Etching

One of the most important applications of atomic layer etching involves silicon dioxide, a material widely used for electrical insulation and dielectric structures in semiconductor manufacturing.

Although silicon dioxide is familiar to semiconductor engineers, removing extremely thin layers with consistent precision remains challenging. Conventional chemical processes can be difficult to control when only a few angstroms of material must be removed.

Research published in January 2026 in Langmuir demonstrated a scalable approach to isotropic atomic layer etching of silicon dioxide using plasma-assisted thermal processing. Researchers developed a method involving controlled surface conversion, fluorination, and removal reactions that achieved self-limiting etching behavior.

The experimental process demonstrated greater than 99% uniformity across a six-inch wafer under the reported conditions. Researchers also applied the method to silicon gate-all-around nanostructures, demonstrating the removal of conformal oxide layers from complex three-dimensional features.

The significance of this work lies in its combination of precision and scalability. While atomic-scale material removal has been demonstrated in laboratory environments for years, adapting these processes to larger wafer areas and complex semiconductor structures remains essential for commercial manufacturing.

The study illustrates how improvements in surface chemistry and process control could expand the practical applications of ALE in advanced transistor fabrication.

Atomic Layer Etching Is Also Improving Compound Semiconductors

Although atomic layer etching is frequently associated with advanced silicon manufacturing, the technology also has important applications in compound semiconductors.

Materials such as gallium nitride, aluminum gallium nitride, and indium gallium arsenide are increasingly important in power electronics, radio-frequency systems, and specialized high-performance devices. These materials often require carefully controlled surface processing because their electrical characteristics can be highly sensitive to defects introduced during manufacturing.

Conventional plasma etching may damage semiconductor surfaces by creating vacancies, modifying chemical bonds, or introducing electrically active defects. These changes can increase leakage current, reduce carrier mobility, and compromise device performance.

Research published in February 2026 in Applied Surface Science examined the use of atomic layer etching to improve interfaces in gallium nitride trench metal-oxide-semiconductor field-effect transistors. The researchers demonstrated that carefully controlled ALE processing could reduce interface defects and improve electrical transport characteristics.

The study reported improvements in channel mobility and reductions in specific on-resistance compared with the reference structures evaluated under the experimental conditions.

These findings suggest that atomic layer etching can serve not only as a patterning technology but also as a method for improving semiconductor interface quality. By removing damaged or defective surface material with greater precision, manufacturers may be able to improve the electrical characteristics and reliability of specialized semiconductor devices.

Memory Manufacturing Presents Another Opportunity

Advanced memory technologies are creating additional demand for precise material removal.

Three-dimensional NAND flash memory relies on vertically stacked structures containing numerous memory layers. Manufacturing these devices requires etching deep, narrow features through complex combinations of materials while maintaining consistent dimensions throughout the structure.

As the number of memory layers increases, the difficulty of maintaining uniform etching conditions also increases. Small variations in feature dimensions can affect electrical behavior, manufacturing yield, and long-term reliability.

Atomic layer etching may provide advantages in selected memory manufacturing steps where highly controlled material removal is necessary. Its ability to improve selectivity and reduce unwanted surface damage can be valuable when processing delicate interfaces or removing thin films within complex structures.

However, ALE is not necessarily the most efficient approach for every etching operation. Deep features requiring substantial material removal may still benefit from conventional high-rate plasma etching. Atomic layer etching is more likely to be used selectively for critical processing steps where precision is more important than removal speed.

This distinction highlights an important characteristic of advanced semiconductor manufacturing. New technologies frequently complement established processes rather than replacing them entirely.

Manufacturing Throughput Remains a Major Challenge

Despite its advantages, atomic layer etching introduces important economic and operational tradeoffs.

Conventional etching systems can remove material continuously, allowing manufacturers to achieve relatively high processing rates. Atomic layer etching relies on repeated cycles of surface modification, material removal, and, in many implementations, intermediate purging or stabilization steps.

These additional operations can increase processing time, particularly when substantial amounts of material must be removed.

A September 2026 industrial review published in the Journal of Vacuum Science & Technology A examined barriers limiting the broader adoption of ALE. Researchers from Samsung Electronics identified several important challenges, including low throughput, imperfect self-limiting behavior, particle generation, and process complexity.

The study also demonstrated potential advantages in low-permittivity dielectric patterning, including improved profile control and increased available copper volume under the evaluated process conditions.

These findings illustrate the balance manufacturers must achieve. Atomic layer etching can improve the precision of critical structures, but the process must also operate efficiently enough to justify its use in high-volume production.

Equipment manufacturers and researchers are therefore investigating faster reaction cycles, improved plasma control, simplified process sequences, and more efficient chamber designs.

The ultimate economic value of ALE will depend on whether improvements in yield, reliability, and device performance outweigh the additional processing complexity.

Materials Selectivity Could Transform Semiconductor Integration

One of the most promising long-term developments involves highly selective atomic layer etching processes capable of removing one material while leaving neighboring materials largely unaffected.

Modern semiconductor devices increasingly combine different materials within extremely small structures. Conventional manufacturing approaches often require additional protective layers or complicated process sequences to prevent unwanted damage during etching.

Highly selective ALE could reduce some of these requirements by exploiting differences in surface chemistry between materials.

For example, a process might be designed to remove a particular dielectric while preserving an adjacent semiconductor channel. Another process could target a specialized metal without significantly affecting surrounding insulating materials.

Such capabilities could support increasingly complex device architectures while reducing the need for additional masking and protective processing steps.

Researchers are also investigating the combination of atomic layer deposition and atomic layer etching within coordinated manufacturing sequences. By alternating highly controlled material addition and removal, engineers may gain greater flexibility in shaping structures and correcting dimensional variations.

These approaches could become increasingly valuable as semiconductor manufacturing moves toward more complex three-dimensional integration and heterogeneous material systems.

Looking Ahead

The semiconductor industry’s continued progress depends on increasingly precise control over materials at extraordinarily small dimensions. While lithography determines where microscopic features should be created and deposition technologies build the necessary material layers, etching ultimately determines how accurately those structures are formed.

Atomic layer etching represents an important advancement because it replaces continuous material removal with carefully controlled surface reactions capable of operating at atomic or near-atomic dimensions.

Recent research demonstrates progress in silicon dioxide processing, compound semiconductor interface engineering, and complex three-dimensional device fabrication. At the same time, industrial studies highlight the challenges that must be overcome before ALE can be deployed more broadly, particularly those involving throughput, process stability, contamination, and manufacturing economics.

The technology is unlikely to replace conventional etching across every semiconductor manufacturing operation. Instead, its greatest value may emerge in the most demanding processing steps, where removing even a small amount of unintended material can compromise device performance.

As transistor architectures become more complex and semiconductor manufacturers integrate increasingly diverse materials, precise material removal will become a critical manufacturing capability.

For decades, the industry has focused on developing technologies capable of creating smaller and more intricate electronic structures. The next phase of semiconductor innovation may depend equally on the ability to remove unwanted material with extraordinary precision.

The future of advanced semiconductor manufacturing may ultimately be shaped not only by how accurately engineers can build structures, but by how precisely they can take them apart.